New Old Stock Rear Landside for Ford General Purpose (GP) and Ford Heavy Duty (HD) Series Moldboard Plows.

This Ford New Holland GP and HD plow landside is the long landside used typically on the plow's rear bottom.

Landside will fit Ford moldboard plows produced before 1958.

Replaces Ford New Holland and aftermarket plow landside part numbers: 100601,  251447,  601W,  109001,  7202,  7237,  251447DS.

The 1st to 2nd bolt hole is 5-3/8" inch apart (center of hole to center of hole, measuring diagonally).

2nd to 3rd bolt hole is 5-1/4" inch apart (center of hole to center of hole, measuring diagonally).

The total width is 4-1/2" inch.

The total length is 21-1/2" inch.

The three front mounting holes on the landside is used to mount the landside to the plow bottom.    The last two bolt holes was used for a optional rolling landside.  The bolt spacing for the rolling landside could have varied.  The bolt spacing is 3-7/8" inch, measuring diagonally from center of hole to center of hole. 

The total length of the landsides will vary depending on manufacturer, but will still fit and function properly.

Please check measurements before ordering to ensure correct fit.

Tillage parts labeled as "New Old Stock" are from various manufacturers. These items will fit and function correctly but vary in color or slightly in shape due each manufacturer's unique pattern. They could be from the original equipment manufacturer or any number of aftermarket suppliers such as Weise, Adams, Osmundson, Crescent Forge, Veldmaster, Star, S&J Kitchin, Hamburg Plow, King Plow, C.F.C., Herschel, and others.  Some of these parts have been out of production for many decades. The brand of tillage parts will vary as inventory is acquired.   There may be some surface rust due to long term prior storage.